Product Details:
• Complete drain assembly for use with the "Tsunami Wave Sink" mold, and "Ramp" style sink molds that integrate a slot-drain style.
• Drain pan attaches to the under side of the concrete sink, catches the water that falls through the concrete sink's slot-drain, and drains into a standard 1 1/2" diameter drain pipe.
• Made of very durable Black ABS plastic.
• Shallow profile (approx. 1" deep), and sloped toward the center to assist water to flow to the drain pipe.
• A Stainless Steel version of this drain kit for slot-drains is also available.
• Available in two sizes: "Tsunami" and "Ramp".
• Drain pan has a 3/4" lip to attach screws through into the concrete, and to provide a surface to silicone for a water-tight seal.

Product Specifications:
• Measurements:
• Tsunami Size: Inner Size: 12 3/4"L x 2 3/4"W. Outer Size: 14 1/2"L x 4 1/2"W x 1"D.
• Ramp Size: Inner Size: 17"L x 2 3/4"W. Outer Size: 18 1/2"L x 4 1/2"W x 1"D.
• 24" Ramp Size: Inner Size: 23 3/4"L x 2 3/4"W. Outer Size: 25 1/4"L x 4 1/2"W x 1"D.
• Drain Assembly Kit includes Drain Pan with threaded collar, 4x 1 1/4" Long concrete screws, a 5/32 concrete drill bit, and a 6" long extension drain tube, 1 1/2" diameter.
• Installation: Create a flat area on the bottom of the concrete, about 3" of concrete to each side of your slot drain. When the concrete is cured (generally after it's installed) place the drain pan against the concrete, position to where it needs to be to catch the water, mark the holes using a sharp pencil, drill out the holes using the concrete drill bit (A hammer drill is recommended), silicone the lip of the drain pan, place on the concrete, and secure using the screws.

Shipping Information:
• Product usually ships in 1-2 business days.

Sample Photos:

E-mail a friend about this item.