Home
> CONCRETE
> Molds- Sinks
> Kitchen Sink Molds
> TC20-UTILITY
Click to View Concrete Fabrication Videos and Instruction Guides:
|
|
 |
Concrete Sink Mold, Utility
SKU: TC20-UTILITY
Retail price: $600.00
Our Price:$225.95
You Save: $374.05 (62%)
|
Product Detail: - The 'Utility' Sink Mold for concrete sink fabrication.
- This mold is suitable for kitchens, kitchenettes, laundry rooms, food prep, or two molds side-by-side for a nice double basin or farm style sink.
- Large style drains for kitchen size drains/disposers.
- Create a seamless integral concrete sink and counter top.
- Reusable- Durable fiberglass construction allows reusing the mold time and time again. (Unlimited with proper care)
- Easily pays for itself with just one use.
- Sink molds have nice clean edges and surfaces.
- Includes one disposable foam drain-hole knockout piece. Additional foam drain pieces available separately.
- Each mold comes with handles on the inside of the mold to aid in pulling the mold out of the concrete.
Product Specifications: - Sink Mold Measurements: 15 3/8" L x 14 1/4"W x 9"D**.
**NOTE: Depth can be adjusted by trimming/sanding down the fiberglass mold to your desired size. - Remember to add 1" - 2" to each side to your measurements to account for the concrete sides of the sink.
- Proper slope (5 degree draft or greater) on sides ensures proper draining and mold removal from concrete.
Mold Setup: - Apply a few coats of a strong wax, such as a carnauba based wax, the the mold prior to pouring concrete. We also sell a release agent that is safe for fiberglass, and does not leave an oily residue on the finished concrete.
- Molds are designed to simply be siliconed in place, and concrete packed around them, or a simple form built up around the mold to hold the concrete in place.
- Still need more information? Click here to download and print an instruction sheet for using the molds.
Mold Removal: - WAX and RELEASE AGENT!! Using wax and a release prior to pouring concrete will usually will allow the mold to just be pulled out using the handles.
- In some cases, adding cold water and ice to the inside of the mold for 10 minutes will shrink the mold just enough that removal is easier.
- In extremely difficult to remove cases, the mold can be pushed out of the concrete through the hole made for the drain.
Mold Care: - Clean with a sponge after each use. Any damage can be repaired using epoxy or gelcoat, and sand smooth when dry.
Shipping Information:
- Usually ships within 2 business days.
Sample Photos:
|
|
Try These Related Products:
|
Shopping Cart | Check Out
Countertop Products
Molds - Sinks
Molds - Drainboards
Molds - Bath Tubs
Edge Form Liners
Concrete Stamps
Stencil Patterns
GFRC | Mixes
Sealers | Coatings
Stains | Color | Release
Polishing Pads | Diamond Grinding
Vibrators | Tables
Snow Melt Systems
Concrete Sinks
