Product Detail:

• The 'Tear' Sink Mold for concrete sink fabrication.
• The 'Tear' mold design can also be used to make the Yin Yang Sink by placing two of the molds side by side, allowing concrete to be poured between them.
• Designed to allow at least an 11.5" dinner plate to fit in the bottom of the sink with ease.
• Large style drains for kitchen/disposer size drains.
• Create a seamless integral concrete sink and counter top.
• Reusable- Durable fiberglass construction allows reusing the mold time and time again. (Unlimited with proper care)
• Easily pays for itself with just one use.
• Sink molds have nice clean edges and surfaces.
• Includes one disposable foam drain-hole knockout piece. Additional foam drain pieces available separately.
• Each mold comes with handles on the inside of the mold to aid in pulling the mold out of the concrete.

Product Specifications:
• Sink Mold Measurements (See picture below): Approx. 16"W x 17"L x 9.25"D**.
**NOTE: Depth can be adjusted by trimming/sanding down the fiberglass mold to your desired size.
• Remember to add 1" - 2" to each side to your measurements to account for the concrete sides of the sink.
• Proper slope (5 degree draft or greater) on sides ensures proper draining and mold removal from concrete.

Mold Setup:
• Apply a few coats of a strong wax, such as a carnauba based wax, the the mold prior to pouring concrete. We also sell a release agent that is safe for fiberglass, and does not leave an oily residue on the finished concrete.
• Molds are designed to simply be siliconed in place, and concrete packed around them, or a simple form built up around the mold to hold the concrete in place.
• Still need more information? Click here to download and print an instruction sheet for using the molds.

Mold Removal:
• WAX and RELEASE AGENT!! Using wax and a release prior to pouring concrete will usually will allow the mold to just be pulled out using the handles.
• In some cases, adding cold water and ice to the inside of the mold for 10 minutes will shrink the mold just enough that removal is easier.
• In extremely difficult to remove cases, the mold can be pushed out of the concrete through the hole made for the drain.

Mold Care:
• Clean with a sponge after each use. Any damage can be repaired using epoxy or gelcoat, and sand smooth when dry.

Shipping Information:

• Usually ships within 2 business days.


Sample Photos:

E-mail a friend about this item.