Home
> CONCRETE
> Molds- Drainboards
> TC101-DNBD-REGATTA
Click to View Concrete Fabrication Videos and Instruction Guides:
|
|
 |
Drainboard Mold, The Regatta
SKU: TC101-DNBD-REGATTA
Retail price: $250.00
Our Price:$125.95
You Save: $124.05 (50%)
|
Product Details: - Rubber Drain Board insert for use with concrete countertop fabrication.
- The Regatta Drainboard has 4 raised grooves in the mold, which create recessed channels in the finished concrete. Grooves add a visual element to the Drainboard, and are designed to assist in draining water to the sink area.
- Clean, nice edges. Fast and simple to use. Add a professional drainboard to your countertop form in minutes.
- Seamless integral drainboard, countertop, and/or sink.
- Drainboard slopes toward sink.
- If the drainboard needs to be shaped (to meet flush with a specific sink), simply cut the rubber mold with a sharp razor knife, or fine tooth jigsaw blade.
- Reusable- Made of durable polyurethane that can flex and stay strong. Re-usable dozens or more times with proper care.
Product Specifications: - Measurements: 12" Wide, 16" long, 3/8"-3/4" Sloped Height (7/8" High if including grooved channels).
- Channels: Outer two are 11 1/4" Long, 5/8" Wide, and 1/8" High. Inner two are 14" Long.
Mold Setup: - Apply a release agent that is safe for rubber (available separately here) just prior to casting the concrete.
- Drainboard Molds are designed to simply be siliconed in place, and concrete packed or poured over/around them.
Mold Removal: - Simply peel the Drainboard Mold out of the cured concrete.
- Any small bumps in the concrete can be lightly removed with 400 grit sandpaper or a Diamond Sanding Block.
Mold Care: - Clean with a sponge after each use.
- Dried concrete can be removed with a stiff brush or carefully scraping with a putty knife.
- Keep Rubber Molds out of direct sunlight to prolong their life.
- Re-apply release prior to each use.
Shipping Information: - Usually ships within 2 business days.
Sample Photos:




|
|
Try These Related Products:
|