Product Detail:
• The 'Oval' Sink Mold for concrete sink fabrication.
• Small style drain for bathroom/lavatory size drains.
• Create a seamless integral concrete sink and counter top.
• Reusable- Durable fiberglass construction allows reusing the mold time and time again. (Unlimited with proper care)
• Easily pays for itself with just one use.
• Sink molds have nice clean edges and surfaces.
• Each mold comes with handles on the inside of the mold to aid in pulling the mold out of the concrete.


Product Specifications:
• Sink Mold Measurements: 15 1/2" Long x 10 Wide x 4 3/4"D**.
**NOTE: Depth can be adjusted by trimming/sanding down the fiberglass mold to your desired size.
• Remember to add 1" - 2" to each side to your measurements to account for the concrete sides of the sink.
• Proper slope (5 degree draft or greater) on sides ensures proper draining and mold removal from concrete.
• Use of wax and a release agent on the mold prior to pouring concrete will make removal easier.

Mold Setup:
• Apply a few coats of a strong wax, such as a carnauba based wax, the the mold prior to pouring concrete. We also sell a release agent that is safe for fiberglass, and does not leave an oily residue on the finished concrete.
• Molds are designed to simply be siliconed in place, and concrete packed around them, or a simple form built up around the mold to hold the concrete in place.
• Still need more information? Click here to download and print an instruction sheet for using the molds.

Mold Removal:
• WAX and RELEASE AGENT!! Using wax and a release prior to pouring concrete will usually will allow the mold to just be pulled out using the handles.
• Using compressed air between the fiberglass and the concrete will release the mold in most cases. In some cases, adding cold water and ice to the inside of the mold for 10 minutes will shrink the mold just enough that removal is easier as well.
• In extremely difficult to remove cases, the mold can be pushed out of the concrete through the hole made for the drain.

Mold Care:
• Clean with a sponge after each use. Any damage can be repaired using epoxy or gelcoat, and sand smooth when dry.

Shipping Information:

• Usually ships within 2 business days.


Sample Photos:

E-mail a friend about this item.