|
|
 |
Home
> CONCRETE
> Molds- Sinks
> Bathroom Sink Molds
> TC36-CHERNO
Click to View Concrete Fabrication Videos and Instruction Guides:
|
|
|
Concrete Sink Mold, Cherno
SKU: TC36-CHERNO
Retail price: $650.00
Our Price:$295.95
You Save: $354.05 (54%)
|
Product Description:
- Unique angular shaped Sink Mold for making concrete sinks.
- 'Slot' style drain. Plexiglass 'slot' piece included with mold, and installs easily with a little silicone.
- All drain hardware hidden from sight. Drain kit assemblies (mount to the bottom side of the concrete sink) sold separately, and available in Stainless Steel or Black ABS Plastic (Our 'Tsunami' size drain pans fit this mold).
- Create a seamless integral concrete sink and counter top.
- Reusable- Durable fiberglass construction allows reusing the mold time and time again. (Unlimited with proper care)
- Easily pays for itself with just one use.
- Sink molds have nice clean edges and surfaces.
- Each mold comes with handles on the inside of the mold to aid in pulling the mold out of the concrete.
Product Details:
- Measurements: Sink- 26 1/8" long, 16 1/8" wide, 6" deep. Drain- 12.5" long, 0.25" wide.
**NOTE: Depth can be adjusted by trimming/sanding down the fiberglass mold to your desired size. - Remember to add 1" - 2" to each side to your measurements to account for the concrete sides of the sink.
- Proper slope (5 degree draft or greater) on sides ensures proper draining and mold removal from concrete.
Mold Setup: - Apply a few coats of a strong wax, such as a carnauba based wax, the the mold prior to pouring concrete. We also sell a release agent that is safe for fiberglass, and does not leave an oily residue on the finished concrete.
- Molds are designed to simply be siliconed in place, and concrete packed around them, or a simple form built up around the mold to hold the concrete in place.
- Still need more information? Click here to download and print an instruction sheet for using the molds.
Mold Removal: - WAX and RELEASE AGENT!! Using wax and a release prior to pouring concrete will usually will allow the mold to just be pulled out using the handles.
- In some cases, adding cold water and ice to the inside of the mold for 10 minutes will shrink the mold just enough that removal is easier.
- In extremely difficult to remove cases, the mold can be pushed out of the concrete through the hole made for the drain.
Mold Care: - Clean with a sponge after each use. Any damage can be repaired using epoxy or gelcoat, and sand smooth when dry.
Shipping Information:
- Usually ships within 2 business days.
Additional Pictures:
|
|
|
Shopping Cart | Check Out
Countertop Products
Molds - Sinks
Molds - Drainboards
Molds - Bath Tubs
Edge Form Liners
Concrete Stamps
Stencil Patterns
GFRC | Mixes
Sealers | Coatings
Stains | Color | Release
Polishing Pads | Diamond Grinding
Vibrators | Tables
Snow Melt Systems
Concrete Sinks